AboveMSL
Well Known Member
Hello Folks,
I pulled a Goof while drilling a #12 hole that holds an AN3-6A bolt. The bolt is one of four that attaches the VS-01402 bracket to the horizontal stabilizer forward spar. The elongated hole is in the forward spar and the gap from the elongation is slightly shy of 1/32" on the top side . I would appreciate suggestions on how to proceed.
Thanks
I pulled a Goof while drilling a #12 hole that holds an AN3-6A bolt. The bolt is one of four that attaches the VS-01402 bracket to the horizontal stabilizer forward spar. The elongated hole is in the forward spar and the gap from the elongation is slightly shy of 1/32" on the top side . I would appreciate suggestions on how to proceed.
Thanks
![mkxb7q.jpg](/proxy.php?image=http%3A%2F%2Fi60.tinypic.com%2Fmkxb7q.jpg&hash=72e2b872d77e61bf895474f42d1b552f)
![2ilm1x4.jpg](/proxy.php?image=http%3A%2F%2Fi58.tinypic.com%2F2ilm1x4.jpg&hash=5c6e9fea407307a49359cde31a7dc9c7)