douglassmt
Well Known Member
This topic is not obviously RV related, but more than you might think. Some of you know that I've been involved with the Miss Montana to Normandy project for the last year or more. We successfully returned a 1944 DC-3/C-47 to airworthiness - it had been sitting for 18 years - and flew her to England, Normandy and Germany for the 75th anniversary of DDay and the 70th anniversary of the Berlin Airlift. And back again over some pretty remote, inhospitable country in the north Atlantic. We've been in AOPA (see latest edition) and EAA magazines, on CBS Sunday Morning, the NY Times, Washington Post and every newspaper in Montana and many beyond. We flew the plane across the channel on June 5 and dropped paratroopers in original WWII garb and round chutes over Normandy, then flew in a presidential fly by at Omaha Beach Cemetery on June 6.
At first glance a DC-3 is nothing like an RV, but au contraire, look deeper. The DC-3 is all aluminum riveted monocoque construction and the power-to-weight ratio is almost precisely that of my RV-10. What struck me as I worked on the plane for much of a year was how many of my skills, tools, and resources were useful on the project. I was able to do a fair bit of metal work to patch holes, install antennas with doublers, and so forth. I was able to wire the largely reinvented instrument panel and associated antennae, headsets, ADAHRS, etc. The radial engines were a new beast but they still suck, squeeze, bang and blow like my Lycoming. In short, because I built an RV I was actually fairly useful on an incredible renovation (and operation) of an historic airplane, and got to fly right seat on a good portion of the entire trip.
I was even able to convince the chief mechanic (with no experimental experience) to install two Dynon D3s as backup attitude indicators instead of reinstalling the entire vacuum system just for two attitude indicators. Dynon graciously donated two of them to our project! SHAMELESS PLUG 1
In addition, I contacted Aeroleds and they gave us a 50% discount on the huge 8 inch LED landing lights that dramatically decrease load and increase life (as well as visibility).SHAMELESS PLUG #2
Because of the trip I was motivated to add commercial and multi-engine ratings, a tailwheel endorsement, and a DC3 SIC type rating in less than a year. Not much else would have prompted me to work so hard.
It keeps occurring to me that, when I started flying 11 years ago and then finished my RV-10 8 years ago I wouldn't have in my wildest dreams ever imagined that I would be able to participate in something like this. It never ceases to amaze me how this community as enriched our lives.
Keep driving those rivets.
PS - you can look us up at missmontanatonormandy.com or on facebook under Miss Montana to Normandy
At first glance a DC-3 is nothing like an RV, but au contraire, look deeper. The DC-3 is all aluminum riveted monocoque construction and the power-to-weight ratio is almost precisely that of my RV-10. What struck me as I worked on the plane for much of a year was how many of my skills, tools, and resources were useful on the project. I was able to do a fair bit of metal work to patch holes, install antennas with doublers, and so forth. I was able to wire the largely reinvented instrument panel and associated antennae, headsets, ADAHRS, etc. The radial engines were a new beast but they still suck, squeeze, bang and blow like my Lycoming. In short, because I built an RV I was actually fairly useful on an incredible renovation (and operation) of an historic airplane, and got to fly right seat on a good portion of the entire trip.
I was even able to convince the chief mechanic (with no experimental experience) to install two Dynon D3s as backup attitude indicators instead of reinstalling the entire vacuum system just for two attitude indicators. Dynon graciously donated two of them to our project! SHAMELESS PLUG 1
In addition, I contacted Aeroleds and they gave us a 50% discount on the huge 8 inch LED landing lights that dramatically decrease load and increase life (as well as visibility).SHAMELESS PLUG #2
Because of the trip I was motivated to add commercial and multi-engine ratings, a tailwheel endorsement, and a DC3 SIC type rating in less than a year. Not much else would have prompted me to work so hard.
It keeps occurring to me that, when I started flying 11 years ago and then finished my RV-10 8 years ago I wouldn't have in my wildest dreams ever imagined that I would be able to participate in something like this. It never ceases to amaze me how this community as enriched our lives.
Keep driving those rivets.
PS - you can look us up at missmontanatonormandy.com or on facebook under Miss Montana to Normandy
Last edited: