bullojm1
Well Known Member
I installed my right tank for the first time last night, and noticed some slight pillowing on the top skin of the tank between the screws -- no more than 1/32". Is this small amount of pillowing normal, or can it be reduced to nothing? I don't want to chase something that can't be fixed! My one thought as to what could be causing it is too much sealant on the outside outboard rib, interferering with the joiner plate to the leading edge, causing the joiner to push the tank skin away from it.
Here is a pic of the pillowing:
Thanks for any advice.
Here is a pic of the pillowing:
Thanks for any advice.