MDeCraene13
Member
My micro-stop cage was behaving erratically, so I took it apart and found a bearing that looked like the attached image.
I decided to attempt to rebuild it and posted the details on my build log here:
Build Log Post Link
The bearing I used was McMaster P/N 7806K64.
I have not used my rebuilt cage extensively, so time will tell how it holds up.
I decided to attempt to rebuild it and posted the details on my build log here:
Build Log Post Link
The bearing I used was McMaster P/N 7806K64.
I have not used my rebuilt cage extensively, so time will tell how it holds up.