Rainier Lamers
Well Known Member
We are shipping our new ECB module.
Briefly, here are the features:
8 breakers programmable up to 10A each.
Bullet proof semiconductor technology switches intended for demanding environments.
Maintains safe operation in case of complete internal electronics failure.
Can be used stand-alone (no EFIS) or connected to EFIS up to 64 breakers (8 modules). EFIS can show individual breaker states, currents etc and depending on desired operating mode, can also set breaker parameters and control breakers.
Soft start and sequential start avoids high inrush currents leading to higher reliability.
In stand-alone mode can be setup quickly without need of a lap top or other computer.
Single or dual color LED breaker state indications (selectable).
Breaker doubling and tripling can be used to create 20A and 30A breakers.
Wigwag functionality for landing lights.
Burst flash functionality to drive ordinary high brightness 12V LED lamps as strobes.
Cost effective alternative to traditional circuit breakers, no need for high current wiring to the panel, ability to decentralise power switching requirements.
Only low current/low voltage latching switches needed (types with built in LEDs are recommended).
Precise control over breaker trip currents regardless of temperature. No breaker fatigue or limited life time.
Rugged, lightweight, flanged aluminium housing for simple mounting.
And more...
Details at www.mglavionics.co.za/ecb.html
Rainier
CEO MGL Avionics
Briefly, here are the features:
8 breakers programmable up to 10A each.
Bullet proof semiconductor technology switches intended for demanding environments.
Maintains safe operation in case of complete internal electronics failure.
Can be used stand-alone (no EFIS) or connected to EFIS up to 64 breakers (8 modules). EFIS can show individual breaker states, currents etc and depending on desired operating mode, can also set breaker parameters and control breakers.
Soft start and sequential start avoids high inrush currents leading to higher reliability.
In stand-alone mode can be setup quickly without need of a lap top or other computer.
Single or dual color LED breaker state indications (selectable).
Breaker doubling and tripling can be used to create 20A and 30A breakers.
Wigwag functionality for landing lights.
Burst flash functionality to drive ordinary high brightness 12V LED lamps as strobes.
Cost effective alternative to traditional circuit breakers, no need for high current wiring to the panel, ability to decentralise power switching requirements.
Only low current/low voltage latching switches needed (types with built in LEDs are recommended).
Precise control over breaker trip currents regardless of temperature. No breaker fatigue or limited life time.
Rugged, lightweight, flanged aluminium housing for simple mounting.
And more...
Details at www.mglavionics.co.za/ecb.html
Rainier
CEO MGL Avionics