Gregg Brightwell
Well Known Member
I battled some pretty intense blowing snow for 2 hours coming home from Wichita last night. But here it is... Finally.
Consider this also a BIG THUMBS UP for TW Metals in Wichita. The cheapest, (and closest) place to get sheet metal for me. The gal I spoke with there was VERY knowledgeable and helpful. I got two 4' X 12' sheets of .032" for $136 a sheet WITH the pvc coating (clear) on both sides. ($8.00 a sheet.)
I also had them cut the sheets to 112" leaving a drop of 32" X 48". (Which will work great for a lower inboard skin!) Out of one 4' X 12' sheet, I get a lower inboard skin, a complete upper main skin, a tank baffle, W-423 splice plate, and whatever else with the drop.
TW Metals also loads it for you (on a skid, but I made my own so it would fit between the wheel wells). Super nice folks.
Time to get a wing back in the jig!
Gregg
![25ov4hk.jpg](/proxy.php?image=http%3A%2F%2Fi40.tinypic.com%2F25ov4hk.jpg&hash=fe1a7e8f340b813be8e9445a0d5a3e65)
Consider this also a BIG THUMBS UP for TW Metals in Wichita. The cheapest, (and closest) place to get sheet metal for me. The gal I spoke with there was VERY knowledgeable and helpful. I got two 4' X 12' sheets of .032" for $136 a sheet WITH the pvc coating (clear) on both sides. ($8.00 a sheet.)
I also had them cut the sheets to 112" leaving a drop of 32" X 48". (Which will work great for a lower inboard skin!) Out of one 4' X 12' sheet, I get a lower inboard skin, a complete upper main skin, a tank baffle, W-423 splice plate, and whatever else with the drop.
TW Metals also loads it for you (on a skid, but I made my own so it would fit between the wheel wells). Super nice folks.
Time to get a wing back in the jig!
Gregg