Master/Alt wiring question

[pazmanyflyer]

Okay gents I just need some clarification on my wiring. I currently have a separate master and alt switch and want to go to the B&C 2-10 progressive switch from the Z drawings. What I need clarification on is if wiring this switch using pole 2 and 5 as power and 1 and 4 to the master solenoid and alt what happens with the 3 and 6? Are they left unused?

 

[f1rocket]

3 and 6 are not used. These are the posts for when the switch is in the "OFF" position.

My wiring diagram is HERE.

 

[pazmanyflyer]

3 and 6 are not used. These are the posts for when the switch is in the "OFF" position.

Thank you Randy for confirming my suspicion and your schematic helped too. I shall proceed with the 2-10 switch.

 

[f1rocket]

Just as an aside, one of the very first airplanes I looked at building was a Pasmany PL-2. I wrote to Mr Pasmany many years ago about his design and he sent me a very nice hand written note back on the -2. Seemed like a very nice gentleman.