Magneto question

[Janekom]

Can someone please tell me what the gap should be on the magneto contact points. Standard Slick. Thanks.

 

[flyingriki]

Manual

Their manual is free to non-commercial customers.
Try www.championaerospacepubs.com to help yourself. If still lost try [email protected] for Joe Logi who is the best there is in the support world and is totally hot on slick mags.

 

[Walt]

Point adjustment is done when settiing the 'E' gap, normal point opening should be .008 - .010"

 

[Bill.Peyton]

Order an e-gap tool from ACS, this essentially sets the gap. Then check it with a feeler gauge. The E gap tool essentially sets the field to pass the magnet at the optimum time to achieve the highest voltage output.