Vansrv7arob
Well Known Member
Hi Guys,
Thought I'd share some photos and progress updates as I move through this mod.
Im not going to share all the details as they can be found on the G3I website.http://www.g3ignition.com/magmod.html
Photo of G3i control box mounting, yes the zip ties will be replaced by p-clamps...
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223842.jpg&hash=f1c9bc97b8d78195aac435609c5d4c43)
The first thing to do is remove the old ignition leads.
Then drill out the holes to size to suit tap easy on a bench drill.
I found the best way to mount the mag caps was to screw them to a bench top.
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223756.jpg&hash=73ad79ac29caa29c7ac107c03a091d9e)
Lots of boelube, the trick to a good tap is start slowly and carefully to get the tap started and straight. Then about 1/8 to 1/4 turn and then back off 1/2 turn to break chips, rinse and repeat until your through.
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223707.jpg&hash=624091b900ca208612582b7dca5f74a9)
I'll post further updates as i move through the process.
Thought I'd share some photos and progress updates as I move through this mod.
Im not going to share all the details as they can be found on the G3I website.http://www.g3ignition.com/magmod.html
Photo of G3i control box mounting, yes the zip ties will be replaced by p-clamps...
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223842.jpg&hash=f1c9bc97b8d78195aac435609c5d4c43)
The first thing to do is remove the old ignition leads.
Then drill out the holes to size to suit tap easy on a bench drill.
I found the best way to mount the mag caps was to screw them to a bench top.
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223756.jpg&hash=73ad79ac29caa29c7ac107c03a091d9e)
Lots of boelube, the trick to a good tap is start slowly and carefully to get the tap started and straight. Then about 1/8 to 1/4 turn and then back off 1/2 turn to break chips, rinse and repeat until your through.
![](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs470%2FVansrv7arob%2FMobile%2520Uploads%2F20161120_223707.jpg&hash=624091b900ca208612582b7dca5f74a9)
I'll post further updates as i move through the process.