RickWoodall
Well Known Member
Just wondered if those that are smarter than me can give any input.
Latest engine analysis is showing that when I run on just one mag very lean (stress test)....my number one cylinder has slightly uneven spark.
ADD- "Diagnostics show that it is not misfiring, or not firing...just not as even a firing as analysis software would like"
Last engine analysis showed marginal plug in cyl 1.
After the first note, I removed, cleaned, resistance tested and regapped plug.
This time I completely replaced plug. Will see if this fixes it.
Just wondering if this may be a sign the mag is starting to have issues? Is it possible that a mag (only 500hrs) and looks brand new, could give this type of issue to just one of the plugs? Is this a common or no way failure sign?
Harness etc all looks like new... Just wondered if i am missing something here that I should address or test further?
Latest engine analysis is showing that when I run on just one mag very lean (stress test)....my number one cylinder has slightly uneven spark.
ADD- "Diagnostics show that it is not misfiring, or not firing...just not as even a firing as analysis software would like"
Last engine analysis showed marginal plug in cyl 1.
After the first note, I removed, cleaned, resistance tested and regapped plug.
This time I completely replaced plug. Will see if this fixes it.
Just wondering if this may be a sign the mag is starting to have issues? Is it possible that a mag (only 500hrs) and looks brand new, could give this type of issue to just one of the plugs? Is this a common or no way failure sign?
Harness etc all looks like new... Just wondered if i am missing something here that I should address or test further?
Last edited: