Hello all.
I'll cut right to it.
.32 E702 Spar
4 AD426 rivets to the E705 root rib
When counter sinking the spar as per the directions in section 5 of the manual I am not able to get the rivet to sit flush without the hole being enlarged. Will this rivet squish in after setting? I don't want to go any deeper and cost me a spar see pictures.
![](/proxy.php?image=https%3A%2F%2Fs6.postimg.org%2Fuan58bvdp%2FIMG_7963.jpg&hash=684dd26df58851cb47005bb0db7be531)
![](/proxy.php?image=https%3A%2F%2Fs6.postimg.org%2Fvoes3mun1%2FIMG_7964.jpg&hash=b3714c3b279bb34ff3c6a83eb1e1d1b2)
Thoughts?
I'll cut right to it.
.32 E702 Spar
4 AD426 rivets to the E705 root rib
When counter sinking the spar as per the directions in section 5 of the manual I am not able to get the rivet to sit flush without the hole being enlarged. Will this rivet squish in after setting? I don't want to go any deeper and cost me a spar see pictures.
![](/proxy.php?image=https%3A%2F%2Fs6.postimg.org%2Fuan58bvdp%2FIMG_7963.jpg&hash=684dd26df58851cb47005bb0db7be531)
![](/proxy.php?image=https%3A%2F%2Fs6.postimg.org%2Fvoes3mun1%2FIMG_7964.jpg&hash=b3714c3b279bb34ff3c6a83eb1e1d1b2)
Thoughts?