CharlieWaffles
Well Known Member
I'm going to call Vertical Power on this tomorrow, but I'm wondering if anyone else has had this issue? This was my first power up today and everything worked except one device. I got the meter out and the voltage at the device was 10.5 Volts. Everything is wired to a VPX for power and everything else was working. I created a short 4 inch test lead and connected it to the same port directly on the VPX and got the same 10.5 Volt reading. I change the lead to another port and saw the expected 14Volts.
So it appears I have one pin for some reason that is outputting 10Volts. Is this a bad device or something else going on?
So it appears I have one pin for some reason that is outputting 10Volts. Is this a bad device or something else going on?