humptybump
Well Known Member
Most things ground to a grounding bus (which is easy for things in the panel). But what about the autopilot servos and a remote magnetometer or AHRS ?
It is "OK" or "a bad idea" to ground the servos direct to the airframe near the servo location ?
When a magnetometer is installed in the tail, It is "OK" or "a bad idea" to ground the unit to a near location on the airframe ?
Is this a vendor specific question ?
It is "OK" or "a bad idea" to ground the servos direct to the airframe near the servo location ?
When a magnetometer is installed in the tail, It is "OK" or "a bad idea" to ground the unit to a near location on the airframe ?
Is this a vendor specific question ?