I?ve decided to use the Vans supplied panel and do a basic day/night VFR panel just to get in the air. Later I?ll build a whole new Garmin G3X panel including auto pilot. Right now I have some older GRT screens, a Gtx 327 transponder and the engine components for the GRT EIS 4000. I'm under the class B and will also have to spring for at least ADSB out.
Including the components I already have, I?m thinking for a Com the Garmin GTR 200B which has a built in intercom, the ACK A30.5 altitude encoder, and really no idea what the cheapest route is for ADSB. I would like to have ?In? capability if cost will allow but would really like to have any components that could transfer over to be compatible with the G3X someday. For a GPS I?m looking at the aera 660 mounted to the panel with the sky geek mount.
Other than that my electrical system will be basic similar to the one offered by the good folks at B and C, seen here.
https://bandc.com/wp-content/uploads/2018/05/001-510_vfr_single_alt.pdf
Any and all input would be appreciated. Again I?m just trying to get a cost conscious panel built and get a couple of kids through college and this 11 year project in the air soon. Thanks!
Including the components I already have, I?m thinking for a Com the Garmin GTR 200B which has a built in intercom, the ACK A30.5 altitude encoder, and really no idea what the cheapest route is for ADSB. I would like to have ?In? capability if cost will allow but would really like to have any components that could transfer over to be compatible with the G3X someday. For a GPS I?m looking at the aera 660 mounted to the panel with the sky geek mount.
Other than that my electrical system will be basic similar to the one offered by the good folks at B and C, seen here.
https://bandc.com/wp-content/uploads/2018/05/001-510_vfr_single_alt.pdf
Any and all input would be appreciated. Again I?m just trying to get a cost conscious panel built and get a couple of kids through college and this 11 year project in the air soon. Thanks!