Hey Guys,
I was taking off and right at rotation the engine started running rough and vibrating badly. Very alarming. As I climbed out it began to run smoothly. I landed, did a run up, all checked good so I took off with no issues. On the 3rd take off I had the same issue. I did check my fuel (100ll) before T/O and it was clear and free of debris and water. I researched on the internet as well here and I am now aware of the issues with the heavy floats and that the carb jets are very small. Has anyone here installed an inline filter after the gascolator/fuel bowl to resolve this issue?
Thanks,
Jack
I was taking off and right at rotation the engine started running rough and vibrating badly. Very alarming. As I climbed out it began to run smoothly. I landed, did a run up, all checked good so I took off with no issues. On the 3rd take off I had the same issue. I did check my fuel (100ll) before T/O and it was clear and free of debris and water. I researched on the internet as well here and I am now aware of the issues with the heavy floats and that the carb jets are very small. Has anyone here installed an inline filter after the gascolator/fuel bowl to resolve this issue?
Thanks,
Jack