Van's Air Force

The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!

Identification of these RV12-iS gaskets

henrysamson

Active Member
Friend
My plane is built and flying and in a recent hangar move I came across these gaskets. I'm at a loss as to what they may be for. They were with the RV-12 parts. I bought my kit from an individual who started an RV-12 and then changed over to an RV-12iS and purchased a new fuselage kit. So, I have LOTS of extra parts as the RV-12 fuselage was only partially completed. So these may be for a non-iS fuselage. Any help appreciated. Thanks!

They are not for the plugs at the fuel pumps although they look similar.

Thanks!

Henry
 

Attachments

  • Screenshot 2026-03-18 at 4.12.09 PM.png
    Screenshot 2026-03-18 at 4.12.09 PM.png
    424.2 KB · Views: 15
  • Screenshot 2026-03-18 at 4.12.38 PM.png
    Screenshot 2026-03-18 at 4.12.38 PM.png
    332.7 KB · Views: 16
I have a very vague memory that those are part of some plug/socket in my Rotax 912 ULS.
 
OK, so those must be extras. I think they were the 3 that came with the avionics kit based on where I found them. I'll go over everything forward of the firewall and make sure that non are missing there.

Thanks!
 
Back
Top