jordanrv6a
Member
ok.. my left magneto stop working., I took it apart and set the e-gap.. it seem the points had something in them keeping them from breaking., but I got a good spark going again after cleaning..timed it bAck internally. and stabed it bAck back in..pulled the pin out.. and timed it at 25% befor top dead center..time ing seemed great.. cranked it up. and the mags checked out .. but the left mag dropped 75 rpm.. and the right 50., well that seemed close enough to normal., but the left mag witch is the one I pulled off . would NOT run up to 2100rpms like the right mag.. it acted like it wasn't getting enough fuel and it got worse.. finally got were it wasn't checking out at 1500rpms., do yall think its the coil is not putting out enough spark! because it is Putting out at spark at low rpm.. but finally gets worse and worse and would die when after about 20 minutes of running engine.. . thTs what my a&p said. just want y'all's a Pinion! when it gets hotter you think the coil is going out the spark would get weaker until the mag stop working?