1- on the HS and VS, they show holes to leave open to attach fairings. I will match drill them, but do I dimple them, or do the attachments later use round heads instead of flat?
2- Reference the pictures below. I need to make a cutout for the elevator control arms to move through a spot in the rear HS spar. The cutout is the hatched section in the second picture. They offer a full-scale drawing of the hinge and horns, but how much clearance do i need around them and the spar? Trying to determine how much to trim widthwise on the spars. Looked ahead in the plans but couldn't find anything.
2- Reference the pictures below. I need to make a cutout for the elevator control arms to move through a spot in the rear HS spar. The cutout is the hatched section in the second picture. They offer a full-scale drawing of the hinge and horns, but how much clearance do i need around them and the spar? Trying to determine how much to trim widthwise on the spars. Looked ahead in the plans but couldn't find anything.
![1F383317-0B9D-4B5C-81EC-8FB72D1511BC_zpsn5pvwnpp.jpg](/proxy.php?image=http%3A%2F%2Fi173.photobucket.com%2Falbums%2Fw60%2FPilotRPI%2FRV7%2F1F383317-0B9D-4B5C-81EC-8FB72D1511BC_zpsn5pvwnpp.jpg&hash=a8741352b73dd4229ab981e1e263ce06)
![57211be9-9d81-4265-a814-0051ab438581_zpsezmyroye.jpg](/proxy.php?image=http%3A%2F%2Fi173.photobucket.com%2Falbums%2Fw60%2FPilotRPI%2FRV7%2F57211be9-9d81-4265-a814-0051ab438581_zpsezmyroye.jpg&hash=f4b6e684eae536c490891952e22fc2e4)
Last edited: