IowaRV9Dreamer
Well Known Member
I've been happily building away on the tail kit, pretty much ignoring the fiberglass tips and the holes where they attach. I have been trying to drill/dimple the few holes that I won't be able to get to later for the CS4-4 rivets. Most of those holes are near narrow trailing edges.
But my question for the group is the two holes on the elevators where the skins overlap (main skin & counterbalance skin). I just left them open, figuring I could handle it later at tip installation time. But now I realize that there are 2 overlapping skins, and I didn't dimple them.
What to do? Can I dimple them now in assembly? Should I have drilled and dimpled them first?
Any help would be appreciated!
But my question for the group is the two holes on the elevators where the skins overlap (main skin & counterbalance skin). I just left them open, figuring I could handle it later at tip installation time. But now I realize that there are 2 overlapping skins, and I didn't dimple them.
![elevatortiprivetsxi4.jpg](/proxy.php?image=http%3A%2F%2Fimg291.imageshack.us%2Fimg291%2F7611%2Felevatortiprivetsxi4.jpg&hash=80fa8b90905973ec23f3c472e47cb519)
What to do? Can I dimple them now in assembly? Should I have drilled and dimpled them first?
Any help would be appreciated!