mikedelta137
Member
I recently had to order replacement skins for my horizontal stabilizer, hs-601pp. When getting ready to put the new skins on I realized the holes did not line up.
[/URL][/IMG]
This is where the 702 spar meets the inboard rib.
here is a pic from the side, you can see the hole is about 1/4 lower than the holes in the spar and rib.
[/URL][/IMG]
Here is the old skin, all the holes are in an even line
[/URL][/IMG]
Every other hole in the skins match up perfect. Has anyone ran into this? The kit is from 2007 so maybe something has changed from then. Any thoughts/suggestions.
![image_1.jpeg](/proxy.php?image=http%3A%2F%2F%5BURL%3Dhttp%3A%2F%2Fs19.photobucket.com%2Fuser%2Fmissyb07%2Fmedia%2FMobile%2520Uploads%2Fimage_1.jpeg.html%5D%5BIMG%5Dhttp%3A%2F%2Fi19.photobucket.com%2Falbums%2Fb187%2Fmissyb07%2FMobile%2520Uploads%2Fimage_1.jpeg&hash=9a22003eb91658c93d1a039bd90714d7)
This is where the 702 spar meets the inboard rib.
here is a pic from the side, you can see the hole is about 1/4 lower than the holes in the spar and rib.
![image_2.jpeg](/proxy.php?image=http%3A%2F%2F%5BURL%3Dhttp%3A%2F%2Fs19.photobucket.com%2Fuser%2Fmissyb07%2Fmedia%2FMobile%2520Uploads%2Fimage_2.jpeg.html%5D%5BIMG%5Dhttp%3A%2F%2Fi19.photobucket.com%2Falbums%2Fb187%2Fmissyb07%2FMobile%2520Uploads%2Fimage_2.jpeg&hash=9d7d9a07d210ce44eddb38ba3d674db5)
Here is the old skin, all the holes are in an even line
![image.jpeg](/proxy.php?image=http%3A%2F%2F%5BURL%3Dhttp%3A%2F%2Fs19.photobucket.com%2Fuser%2Fmissyb07%2Fmedia%2FMobile%2520Uploads%2Fimage.jpeg.html%5D%5BIMG%5Dhttp%3A%2F%2Fi19.photobucket.com%2Falbums%2Fb187%2Fmissyb07%2FMobile%2520Uploads%2Fimage.jpeg&hash=6d0ecd67655bccd3fb3df97c0b46d03d)
Every other hole in the skins match up perfect. Has anyone ran into this? The kit is from 2007 so maybe something has changed from then. Any thoughts/suggestions.