Honda S2000 starter switch wiring

[Flyguytki]

For those of you who have or will be using a Honda S2000 start button how did you wire it. I don't need the annunciation light or fancy gadgets just push the button and it starts. I am also using a VP-X so the wifi no will look like a wire from the Vpx to the button and then from the button to the start solenoid.

Thanks in advance


-David

 

[UnPossible]

I have this exact combo on my plane (VP-X and S2000 starter switch) and it works well.

I ended up using a secondary 12V relay from the autoparts store.

One thing to be careful with, is that it matters which side of the s2000 switch you send power to. I had to have have an electrical engineer buddy with an ocilliscope come and help me troubleshoot some weird starter issues I was having.

When we switched around the leads on the s2000 switch, everything worked fine. Below is a sketch of the wiring diagram I used. Take a look at some of the s2000 intallation DIY guides to determine the direction to send power through the switch and you should be fine.

Hope this helps,
Jason