Hex Sockets

[JohnF]

I noticed reference in a post in the last few days (at most) regarding needing a socket/hex set for the engine work...I am a few days away from starting on the engine but can't find that post...I wanted to ask if it was metric or SAE and what sizes are needed...would save a hour or so searching through that pretty thick engine instruction package...I just could not locate the post...was it you?

 

[erich weaver]

I think you cant find it because you didnt see it here - it was in the RVator that you probably downladed from this site. I used to have a 912S in my ultralight days- there were 3 or 4 hex sockets needed and they were metric although I cant remember the sizes. Im sure someone will come up with that pretty quick...

erich

 

[mrt890]

Hes sockets

It was in the new RVator. You need metric allen sockets for the engine. Just buy a set. Don't have the sizes handy. Bought below set off Ebay and quality was pretty good.

http://cgi.ebay.com/ebaymotors/7pc-...Z280269434476QQptZMotorsQ5fAutomotiveQ5fTools

 

[JohnF]

Hex/sockets

Thanks fellows...will re-read the Rvator...