Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
heater vent servos
- Thread starter glenn72pc
- Start date
Lenny Iszak
Well Known Member
I think it was Greg Hale's site:
http://www.nwacaptain.com/heatcool.html
Lenny
http://www.nwacaptain.com/heatcool.html
Lenny
Phil
Well Known Member
I'd be really surprised if those servos last very long.
I just checked the spruce site (and Ray Allen) to see if I could find some specs on maximum operating temperature, but it's not listed.
That is one of the hottest areas. Especially after shutdown when there's no airflow moving the heat away. I've heard a few RV-10 flyers say they've seen 200 degree + temps right there.
That just looks like a nightmare waiting to happen.
I just checked the spruce site (and Ray Allen) to see if I could find some specs on maximum operating temperature, but it's not listed.
That is one of the hottest areas. Especially after shutdown when there's no airflow moving the heat away. I've heard a few RV-10 flyers say they've seen 200 degree + temps right there.
That just looks like a nightmare waiting to happen.
Lenny Iszak
Well Known Member
Ray Allen says that it's made of Dupont's Minlon, the same material being used by BMW for valve covers.
