Av8torTom
Well Known Member
I was fitting the longerons and I positioned them about half inch too far aft. They should be lined-up with the flange of the F-712 bulkhead
So what's the collective wisdom of this forum. I can widen the notch I cut in the longeron that I made for the F-711C and slide the longeron forward half an inch, but will that impact strength? Make some sort of patch?
Thanks,
Tom
So what's the collective wisdom of this forum. I can widen the notch I cut in the longeron that I made for the F-711C and slide the longeron forward half an inch, but will that impact strength? Make some sort of patch?
Thanks,
Tom