I'm getting ready to order a governor and I need to know the rotation of the lever. It appears to me that it is CCW from the instructions. Can anyone confirm? Thanks!
On my io540(RV10), looking at the governor from the end where the control rod is attached, a CW rotation increases RPM. Looking at the plans it should be obvious: throttle forward increases the length of the cable, this should increase rpm.
On my io540(RV10), looking at the governor from the end where the control rod is attached, a CW rotation increases RPM. Looking at the plans it should be obvious: throttle forward increases the length of the cable, this should increase rpm.
