jeffw@sc47
Well Known Member
My Garmin panel units have been in their trays for at least the last 9 months, and during the install in and out multiple times.
For the GTN650, the comm 200, and the audio panel >>
I needed to pull them out to record their serial numbers - can't find all of the paperwork. The audio panel came out - no problem.
Both the 650 and the 200 only pulled out about 3/4" and then both are hanging up on something, apparently within their trays.
Am I holding my tongue wrong? First I thought that I needed to disconnect the antenna cables - nope, those and the harness connect plugs connect onto the back of the tray connector interface. Has to be something within the tray that is catching and I can't see how I can dislodge something like that.
Or is it something else?
For the GTN650, the comm 200, and the audio panel >>
I needed to pull them out to record their serial numbers - can't find all of the paperwork. The audio panel came out - no problem.
Both the 650 and the 200 only pulled out about 3/4" and then both are hanging up on something, apparently within their trays.
Am I holding my tongue wrong? First I thought that I needed to disconnect the antenna cables - nope, those and the harness connect plugs connect onto the back of the tray connector interface. Has to be something within the tray that is catching and I can't see how I can dislodge something like that.
Or is it something else?