Garmin Hex tool?

[CharlieWaffles]

Anyone know of a good source for a 3/32" hex tool to actuate the Garmin GTN mounting mechanism for removal/insertion? My standard bent hex wrenches are too short. Figure they need to be at least 6-8" long to work. AviationDepot was no good.

 

[ccsmith51]

If you have a Harbor Freight in the area, look for these:

http://www.harborfreight.com/10-piece-t-handled-hex-key-set-37861.html

I have something similar and they work great on my xponder and comm.

 

[Mike S]

Go to a hobby shop that caters to R/C folks.

You can find a screwdrive like Allen wrench there that is perfect for this.

http://shop.dubro.com/products/prod...t_number=443/101.0.1.1.5161.5182.0.0.0?pp=12&

 

[SteinAir]

Anyone know of a good source for a 3/32" hex tool to actuate the Garmin GTN mounting mechanism for removal/insertion? My standard bent hex wrenches are too short. Figure they need to be at least 6-8" long to work. AviationDepot was no good.

Get hold of me tomorrow and I'll get you taken care of.

Cheers,
Stein