jthocker
Well Known Member
Maybe Stein can answer this.
My 327 transponder is getting RS232 Data from both my Dynon D180(ch 1) for the encoder, and from my 496 (ch 2) for groundspeed.
The encoder works like a champ. The unit goes from standby to ALT automaticly but does not "appear" to go into standby on the ground after the default 24 seconds of zero groundspeed.
Ch 1 is set to Icarus Alt
Ch 2 is set to GPS
Autostandby is ON
Squat swiches OFF
Am I missing something.
My 327 transponder is getting RS232 Data from both my Dynon D180(ch 1) for the encoder, and from my 496 (ch 2) for groundspeed.
The encoder works like a champ. The unit goes from standby to ALT automaticly but does not "appear" to go into standby on the ground after the default 24 seconds of zero groundspeed.
Ch 1 is set to Icarus Alt
Ch 2 is set to GPS
Autostandby is ON
Squat swiches OFF
Am I missing something.