Jesse
Well Known Member
I helped troubleshoot an installation of a GDL82 in a Bonanza today. It is wired to a GNS530W. The manual says how to wire it and it is wired correctly, but it doesn?t say how to configure the 530 for serial data in and out and the computer program said it wasn?t receiving data. We changed the serial port to GDL88 and it started working. Does anybody have a clue why this would be the case and why that wouldn?t be in the manual?
On a side note, when connecting to a GTN, the manual says to set it as ADSB+ Format 1, and its only a serial transmit from the GTN, and no receive.
On a side note, when connecting to a GTN, the manual says to set it as ADSB+ Format 1, and its only a serial transmit from the GTN, and no receive.