JamesClarkIV
Active Member
Hi All,
The G3X has arrived, I would be interested in comments on this very first cut of a IFR panel layout for my 7A.
G3X PFD & MFD (Primary attitude)
GX Pilot Autopilot (2nd attitude source)
G430W GPS/NAV/Comm #1
SL30 NAV/Comm #2
GTX330 Transponder with traffic
GMA240 Audio Panel
VP200 Electrical
ADI With GPS & Backup Batt (Backup attitude & track)
Heated pitot (not shown)
CO2 monitor
AFS AOA Pro (not shown)
You can take a look at my layout here:
http://www.dropbox.com/gallery/11894268/2/RV7 Airplane Project/Assembly?h=311f19
I think the VP200 will need to be canted to the left. Is this an issue? Can I get by without the CDI?
Thanks from a long time lurker...
The G3X has arrived, I would be interested in comments on this very first cut of a IFR panel layout for my 7A.
G3X PFD & MFD (Primary attitude)
GX Pilot Autopilot (2nd attitude source)
G430W GPS/NAV/Comm #1
SL30 NAV/Comm #2
GTX330 Transponder with traffic
GMA240 Audio Panel
VP200 Electrical
ADI With GPS & Backup Batt (Backup attitude & track)
Heated pitot (not shown)
CO2 monitor
AFS AOA Pro (not shown)
You can take a look at my layout here:
http://www.dropbox.com/gallery/11894268/2/RV7 Airplane Project/Assembly?h=311f19
I think the VP200 will need to be canted to the left. Is this an issue? Can I get by without the CDI?
Thanks from a long time lurker...