jetjok
Well Known Member
Fuel Cap Adjustment and Roll Pin
Not wanting to drift from the other posting about fuel cap openers, I am starting a new thread (which probably has been covered numerous times) about the roll pin on the fuel caps.
I had numerous instances where the roll pin fractured, and left me high and leaky at out locations. I changed over to .062 (1/16") drill stock and have had no further problems.
Not wanting to drift from the other posting about fuel cap openers, I am starting a new thread (which probably has been covered numerous times) about the roll pin on the fuel caps.
My wings were quickbuild, and the caps came installed, and I have not tried to adjust them. They do seem maybe a tad tight. I really worry about that roll pin, tempted to put a piece of drill rod in there.
I had numerous instances where the roll pin fractured, and left me high and leaky at out locations. I changed over to .062 (1/16") drill stock and have had no further problems.