Fuel Tank Antirotation Brackets. 4 of them?

[John Courte]

I've got that 'I might have &*^%ed up' feeling.

Looking through my drawers of parts, I have what are unmistakably two antirotation brackets for securing the fitting on the fuel pickup tube inside the tank.

I distinctly remember installing two of them, one on each fuel pickup fitting, but I do not recall a place on the plans describing the location of the other two. If I recall correctly, all 4 came on one stamped and bent piece of aluminum and the individual brackets were cut by quartering this piece on a bandsaw.

The nagging question is... What are the other two antirotation brackets supposed to go to?

 

[JonJay]

I only remember two, one for each pick up tube. I made them myself before the kit came out. The whole sb was a complete waste of time, but I digress.... chalk it up to "if I knew then...."

 

[scard]

The 'extra' two are stamped for a slightly different rotation orientation. Use the two that fit the best.

 

[John Courte]

Thanks!

Scott, that's exactly what I did. OK, now I can stop worrying about that keep looking for a hangar.

 

[bret]

Whew...that is good to know.