I'm getting a ~1 psi drop in fuel pressure after installing Anti-Splat Aero Vacuum kit on oil separator. Seems like this is normal since the pump diaphragm is exposed to crankcase atmosphere.
My question is how low is too low? Lycoming manual says 0.5 psi minimum at carb and I'm at ~2.0 in cruise before the red cube...which drops it a little more (0.5 psi at most)
Good news...I defiantly gained (as Charlie Berens would say) a-couple-two-tree knots
Merry Christmas!
My question is how low is too low? Lycoming manual says 0.5 psi minimum at carb and I'm at ~2.0 in cruise before the red cube...which drops it a little more (0.5 psi at most)
Good news...I defiantly gained (as Charlie Berens would say) a-couple-two-tree knots
Merry Christmas!
Last edited: