Fuel Level Wire Issue......Help Needed

[ViperDriver]

Howdy,

I am planning to mate the wings to the fuselage this weekend but i have a quick question for anyone who can help. While all the other wires from the wing come out to the rear of the spare the fuel level wire is on the leading edge side and I would like to avoid drilling a separate hole just for that single 22 gauge wire. I have look at several ways to run it over the spar but I am unsure how much room is really there once the wing is mounted and the fairings are on. Any advice would really help me out. Thanks!

 

[Mel]

The fuel gauge wiring needs it's own hole & grommet.
Don't be tempted to run it in the same hole as the fuel line. That's a NO-NO!

 

[victor]

fuel gage wire

Once the wings are installed you will have room to run the wire through the spar center section and out the sidewall.

 

[ViperDriver]

Thanks for the quick response guys!