tonyjohnson
Well Known Member
I have searched the forums for information on the routing of my fuel lines and have determined that the best route for the fuel line between the fuel injection servo and the fuel divider is straight up between cylinders 2 and 4. That requires that the hose pass through the inter cylinder baffle.
When I drilled a pilot hole in preparation for drilling a larger hole for the hose to pass through, I discovered that an injector line (I think that is what it is) blocks the path of the hose just under the inter cylinder baffle.
Can anyone offer any insight as to how you routed the hose between the fuel servo and the fuel spider on the top of the engine? Did any of you route the line in another path, perhaps across the top of the engine to the back, through the baffle then down to the pump?
My setup is a superior IO360 vertical draft engine with a precision fuel injection system.
Thanks
When I drilled a pilot hole in preparation for drilling a larger hole for the hose to pass through, I discovered that an injector line (I think that is what it is) blocks the path of the hose just under the inter cylinder baffle.
Can anyone offer any insight as to how you routed the hose between the fuel servo and the fuel spider on the top of the engine? Did any of you route the line in another path, perhaps across the top of the engine to the back, through the baffle then down to the pump?
My setup is a superior IO360 vertical draft engine with a precision fuel injection system.
Thanks