This seems a little weird. When match drilling, all was good and right. But now that I am installing the front floors, the outboard-most hole alignment is off (These are the holes on top of the joggle that attach to the channel which is in turn attached to the skin). The miss-alignment is off the same amount on both sides of the airplane. I can flex the skin/channel enough to get clecos in, but it seems to take a lot of force. Has anyone else encountered this?
![IMG-20140413-00052-1024x768.jpg](/proxy.php?image=http%3A%2F%2Fairplane.athomeinthewilburness.com%2Fwp-content%2Fuploads%2F2014%2F04%2FIMG-20140413-00052-1024x768.jpg&hash=71e1cd7dc7f1aa41e9704d5cd8c8543a)
![IMG-20140413-00053-1024x768.jpg](/proxy.php?image=http%3A%2F%2Fairplane.athomeinthewilburness.com%2Fwp-content%2Fuploads%2F2014%2F04%2FIMG-20140413-00053-1024x768.jpg&hash=292a8a339df6dc1ec38164a2a95f8573)