I have a Dynon system with HDX screens. In the past when you looked at the info for a particular airport, you could click the Wx tab, scroll to the bottom, and see the forecasted winds at 3000, 6000, 9000, etc. These pages now only show the forecasted winds at 3000.
Curious to see if it is just my screens, my area, or what. Do not know if this is a coincidence or not, but it seems like the issue just started during the deep freeze that we had here in Texas in February. There were com stations affected because of the freeze. This is what an air traffic controller told me while I was using flight following to El Paso. I surmised that maybe other FAA devices could have been affected.
Anyhow, before I contacted Dynon, I would reach out to see if there are others with the same issue.
Curious to see if it is just my screens, my area, or what. Do not know if this is a coincidence or not, but it seems like the issue just started during the deep freeze that we had here in Texas in February. There were com stations affected because of the freeze. This is what an air traffic controller told me while I was using flight following to El Paso. I surmised that maybe other FAA devices could have been affected.
Anyhow, before I contacted Dynon, I would reach out to see if there are others with the same issue.