I'm trying to wire the control board into the stock Van's/Stein harness using Flyleds position/strobe lights with a Van's tail strobe.
If you have done this please let me know how you did it. I've read all of Flyleds manuals, emailed Paul, talked with Stein Air, had my tech counselor look at it and it's not getting through my thick head. The simple answer is that I need the board to control the wing strobes but not the tail...simple.
When the rubber meets the road and I start looking for wires to splice and where to put the board, it gets very convoluted. I don't want to get into too many of the specifics but if you've done this, please give me the details on the method you used.
Thanks,
Jim
If you have done this please let me know how you did it. I've read all of Flyleds manuals, emailed Paul, talked with Stein Air, had my tech counselor look at it and it's not getting through my thick head. The simple answer is that I need the board to control the wing strobes but not the tail...simple.
When the rubber meets the road and I start looking for wires to splice and where to put the board, it gets very convoluted. I don't want to get into too many of the specifics but if you've done this, please give me the details on the method you used.
Thanks,
Jim