Section 21, page 5, I'm fabricating the trailing edge pieces for the left flap. This here is the short section of trailing edge clecoed to FL-00002B. I know this is the correct side of the correct edge of this skin because I counted the holes and compared to the diagram.
![2D6478FA-8F9E-4C5A-BF63-833201E451DE.jpg 2D6478FA-8F9E-4C5A-BF63-833201E451DE.jpg](https://vansairforce.net/data/attachments/15/15770-33efc0968a793de92b4151d132251e55.jpg)
But something isn't right. The trailing edge wedge isn't flush with the edge of the skin, it sticks out past the skin by about 3/64". This is a picture from the other side of the skin from directly above, and you can see the wedge sticking out behind it.
![649D862B-D267-4B6F-B05A-4D310A51CD68.jpg 649D862B-D267-4B6F-B05A-4D310A51CD68.jpg](https://vansairforce.net/data/attachments/15/15771-c26badcd47aa79cde71520ccb0f578c5.jpg)
What did I get wrong?
![2D6478FA-8F9E-4C5A-BF63-833201E451DE.jpg 2D6478FA-8F9E-4C5A-BF63-833201E451DE.jpg](https://vansairforce.net/data/attachments/15/15770-33efc0968a793de92b4151d132251e55.jpg)
But something isn't right. The trailing edge wedge isn't flush with the edge of the skin, it sticks out past the skin by about 3/64". This is a picture from the other side of the skin from directly above, and you can see the wedge sticking out behind it.
![649D862B-D267-4B6F-B05A-4D310A51CD68.jpg 649D862B-D267-4B6F-B05A-4D310A51CD68.jpg](https://vansairforce.net/data/attachments/15/15771-c26badcd47aa79cde71520ccb0f578c5.jpg)
What did I get wrong?