John Tipton
I'm New Here
Hi Guys
Anyone had a problem when finally attaching the Flap motor pushrod with the Flap arm actuator weldment (WD-613-EF), that the two are not properly aligned, and is binding on one flange.
I can't see any other way but to order a replacement F-766A and move the F-766B position over to the left, to allow the Flap motor mounting to move across, thus allowing a clearance fit.
John
Anyone had a problem when finally attaching the Flap motor pushrod with the Flap arm actuator weldment (WD-613-EF), that the two are not properly aligned, and is binding on one flange.
I can't see any other way but to order a replacement F-766A and move the F-766B position over to the left, to allow the Flap motor mounting to move across, thus allowing a clearance fit.
John