I'm fitting my flaps, trimming to fit the fuselage and something doesn't look quite right. More still needs to be trimmed for the flaps to fully retract but the trailing edges of the flap and aileron line up now. Once the flap is trimmed to fully retract its trailing edge will be a bit higher than the trailing edge of the aileron. I don't know now by how much but the third photo down shows how much trimming still needs to be done.
According to the plans the aileron is in neutral position in these photos. I also rechecked the wing incidence and it is correct. The flaps do not appear to have any twist.
Any thoughts on this will be greatly appreciated.
According to the plans the aileron is in neutral position in these photos. I also rechecked the wing incidence and it is correct. The flaps do not appear to have any twist.
Any thoughts on this will be greatly appreciated.