I recently completed the assembly and installation of the two vent assemblies in section 28 of the fuselage kit for my 14A project. However, while looking through the revision updates on the Vans website, it appears the vent assembly gets modified in section 48. The attached picture is from page 48-04. It shows two blind rivets that need to be drilled out, and the installation of a cover plate (FF-00084) that is sealed with RTV.
I thought this may be a mod for the tail dragger only, but it is tough to tell not having that set of plans yet.
It seems it would be much easier to make that modification now, since everything is easily accessible, than to wait until later when the engine is mounted.
For those that have completed this section, can you help me with the "big picture"?
Pic should be here.
[/url][/IMG]
I thought this may be a mod for the tail dragger only, but it is tough to tell not having that set of plans yet.
It seems it would be much easier to make that modification now, since everything is easily accessible, than to wait until later when the engine is mounted.
For those that have completed this section, can you help me with the "big picture"?
Pic should be here.
Last edited: