bobmarkert
Well Known Member
My fairing rough work is done and now I want to work on the finish fiberglass. My question is:
If there is an uneven transition between parts do I start with a thin layer of glass cloth then finish with SuperFil / and or epoxy and microballoons on top or should I put the filler down first and then glass cloth on top. All suggestions appreciated.
Thank you
If there is an uneven transition between parts do I start with a thin layer of glass cloth then finish with SuperFil / and or epoxy and microballoons on top or should I put the filler down first and then glass cloth on top. All suggestions appreciated.
Thank you