I'm working on collecting data for balancing the FI nozzles in the RV-10.
I've been following the procedures in from airflow performance's web site.
The plane is equipped with an AFS 3500, the old style flow meter in the tunnel (flow-scan, I believe - not a red cube), and a quadrant style (non-vernier) mixture control.
I'm struggling to get data every 0.2gph
I can't get the mixture control to move in increments of 0.2gph
On previous x-c flights, the fuel flow settles down and is steady, but I'm really having trouble getting good numbers in these increments (or even something close, 0.3 or 0.4)
Any suggestions??
Thanks
I've been following the procedures in from airflow performance's web site.
The plane is equipped with an AFS 3500, the old style flow meter in the tunnel (flow-scan, I believe - not a red cube), and a quadrant style (non-vernier) mixture control.
I'm struggling to get data every 0.2gph
I can't get the mixture control to move in increments of 0.2gph
On previous x-c flights, the fuel flow settles down and is steady, but I'm really having trouble getting good numbers in these increments (or even something close, 0.3 or 0.4)
Any suggestions??
Thanks
