requested on the following system: Twin battery, alternator and bus system. Basically two complete and separate systems, with a cross tie relay to power either system in the event of an alternator failing. Electrically dependent fuel system.
There are three fuse blocks. I could use one fuse block for the two fuel pumps, utilizing diodes from each alternator system. Alternatively, I could simply fuse one pump to each alternator system.
Keep it simple, or use the fuse block as an essential buss? And why, if you please.
There are three fuse blocks. I could use one fuse block for the two fuel pumps, utilizing diodes from each alternator system. Alternatively, I could simply fuse one pump to each alternator system.
Keep it simple, or use the fuse block as an essential buss? And why, if you please.