Draker
Well Known Member
VAF searches show several builders encountering skin fit issues with this F-711 bulkhead. During prep I see mine are quite warped along the vertical axis:
Could this be related to later skin fit issues? Is there a way to straighten these so they lay flat? I know fluting tends to straighten about the horizontal axis (perpendicular to the flute) so I doubt that would help. I noticed other bulkhead ribs don't lay flat either.
Also, look at the flanges on F-711B as they come from Van's. Are these supposed to be squared like that? The instructions don't suggest it. I have an irresistible urge to round off those corners.
![IMG_0916-M.jpg](/proxy.php?image=https%3A%2F%2Fphotos.smugmug.com%2FRV7%2FFuselage%2Fi-6npQ27j%2F0%2Fddd2678f%2FM%2FIMG_0916-M.jpg&hash=b3a58d184e22d4626aec1f970d34a427)
Could this be related to later skin fit issues? Is there a way to straighten these so they lay flat? I know fluting tends to straighten about the horizontal axis (perpendicular to the flute) so I doubt that would help. I noticed other bulkhead ribs don't lay flat either.
Also, look at the flanges on F-711B as they come from Van's. Are these supposed to be squared like that? The instructions don't suggest it. I have an irresistible urge to round off those corners.