I'm looking at doing some panel mods. Some side-by-side RV's have installed a horizontal strip across the the bottom of their panel, about 2" wide, for mounting various switches, push-pull knobs etc. I'm wondering what people have used for material for this. Many of them use a piece about 2" wide that have a nice rounded bend at the bottom edge.
One local builder used a piece of Van's aluminum packing material for this (this is not an option for me, obviously, since I've long since discarded all of that).
Another option is to get some thick aluminum sheet stock and bend it myself.
I'm wondering what other people have used... is there a standard Vans par that can be repurposed for this?
One local builder used a piece of Van's aluminum packing material for this (this is not an option for me, obviously, since I've long since discarded all of that).
Another option is to get some thick aluminum sheet stock and bend it myself.
I'm wondering what other people have used... is there a standard Vans par that can be repurposed for this?