170 driver
Well Known Member
I ordered a Van's primer system and after reading the threads about copper tubing, I decided to see if there was a flex line option. I called Tom Swearengen from TS Flightlines and we talked it over. He said that he had no materials for #2 lines but he had #3 braided stainless teflon. I looked at the lines and they were small enough in outside diameter to make a neat install, so I got him to make the lines and ordered #3 fittings from a/s. I am very pleased with the setup now. I had him also make restricted #3 nozzles for the cylinders to reduce the flow and not flood the engine as easily. Overall a very nice and much more robust install with much less chance of vibration causing line breakage. I'd highly recommend Tom for any line work, great job at a good price and very fast service. He is on the forums here, TS Flightlines