engine data plate material

[rjcthree]

I searched, but did not find a thread or a FARS/AC answer to this one:

Can I make my engine data plate from Aluminum?

The mechanical marking punch device I have doesn't do well in stainless.

Rick 90432

 

[az_gila]

I searched, but did not find a thread or a FARS/AC answer to this one:

Can I make my engine data plate from Aluminum?

The mechanical marking punch device I have doesn't do well in stainless.

Rick 90432

I believe it has to be fireproof, and alum. won't pass.

There is a FAA AC out there on marking/labelling parts.

 

[LifeofReiley]

Type up the info you want on the data plate and take it to a trophy shop for professional engraving... cost me about $15. Heck, I can mail you a small piece of stainless if you need it.

I searched, but did not find a thread or a FARS/AC answer to this one:

Can I make my engine data plate from Aluminum?

The mechanical marking punch device I have doesn't do well in stainless.

Rick 90432

 

[rjcthree]

Thanks guys

I was curious about the fireproof thing . . .and I have PLENTY of stainless, but thanks. The trophy shop ideae is a good one, I'll try that. Rick 90432