Saw some plastic baffle ignition wire seals on an older Piper that would work well on my -9. It appeared that you would drill about an 1.25" dia. hole in the baffle, and this part would open for the two ignition wires, then fit into the hole after you closed the fitting around the wires. It was secured to the baffle by screws and nuts on two lugs that were molded into the fitting.
It appeared to be a Piper part
Has anyone seen these, or know where to obtain something like it.
Thanks
Jack
It appeared to be a Piper part
Has anyone seen these, or know where to obtain something like it.
Thanks
Jack